Ariens 927069-14532 Spezifikationen PDF herunterladen (Seite 18)

GB - 18

MOWER BLADE REPLACEMENT

Remove (figure 15)

1. Place mower lift lever in the highest

position.

2. Block mower blade to prevent rotation.

3. Remove mower blade from clutch.

Install (figure 15)

1. Install mower blade on clutch.

2. Torque hex bolts to 45-55 lbf-ft

(61 - 75 N•m).

SHARPENING MOWER BLADE

1. Remove mower blade from unit (see

MOWER BLADE REPLACEMENT on

page 18).

NOTE: Ariens recommends having the

mower blade sharpened by a professional.

Contact your Ariens dealer.

Discard mower blade if (figure 16):

• more than 1/2 in. (1.27 cm) of metal is

removed.

• air lift erosion area is eroded.

• mower blade is bent or broken.

Do not change angle of cutting edge or round

the corner at the end of mower blade.

2. Sharpen mower blade by removing an

equal amount of material from each end

of mower blade.

3. Check mower blade balance by sliding

mower blade on an unthreaded bolt. If

blade is balanced, it should remain in a

horizontal position. If either end of

mower blade moves downward, sharpen

the heavy end until mower blade is

balanced.

4. Install mower blade on unit (see

MOWER BLADE REPLACEMENT on

page 18).

Servicing the Battery

NOTE: Unit comes equipped with a

maintenance-free battery that requires no

regular maintenance except cleaning

terminals.

Battery Removal and Installation

Remove (Figure 17)

1. Tip seat forward (see TIPPING THE

SEAT FORWARD on page 15).

2. Disconnect negative (–) cable first then

positive (+) cable.

CAUTION: A mower blade is sharp

and can cut you. Wrap the mower

blade or wear gloves, and use extra

caution when servicing.

CAUTION: DO NOT sharpen mower

blade while on unit. An unbalanced

mower blade will cause excessive

vibration and eventual damage to

unit. Check mower blade balance

prior to reinstalling mower blade.

NEVER weld or straighten a mower

blade.

Figure 15

OA0011

1. Clutch

2. Mower Blade

3. Washer

4. Lock Washer

5. Hex Bolt

3

1

2

4

5

5

4

3

WARNING: Battery posts, terminals

and related accessories contain lead

and lead compounds, chemicals

known to the State of California to

cause cancer and reproductive harm.

Wash hands after handling.

1. Air Lift Erosion

Area

2. Cutting Edge

Figure 16

OA0014

2

1

DO NOT Sharpen to this Pattern

Sharpen to this Pattern

DISCARD if

more than

1/2 in.

(1.27 cm)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare