Ariens Promaster 144Z Spezifikationen PDF herunterladen (Seite 16)

WARNING: AVOID INJURY. Read and understand

entire Safety section before proceeding.

Proper maintenance can prolong the life of unit. The

following charts show the recommended service schedule.

More frequent service may be required due to working

conditions (heavy loads, high ambient temperatures, dusty

conditions, or airborne debris).

See the maintenance instructions in the Engine Manual for

additional information.

Interval Task Action

Each

Use

Check Safety Interlock System

Check Parking Brake

Check Hydraulic Oil Level

Check Tires

Clean Unit

Follow Engine Maintenance Schedule

Check Mower Blades

Every 25

Hours

_b ARNING: Safety interlock system failure and improper

operation of unit can result in death or serious injury.

Test this system each time the unit is operated. If this

system does not function as described, do not operate

until repairs are made. See Safety Interlock System on

page 12.

Engage parking brake. Push unit. If unit rolls, adjust parking

brake (see PARKING BRAKE ADJUSTMENT on page 22).

See Check Hydraufic Fluid Level on page 17.

See SPECIFICATIONS on page 28 for correct tire pressure.

Clean engine, battery, seat, mower deck, etc. of dirt and debris.

Do not use solvents, hard cleaners, or abrasives.

NOTE: Protect painted surfaces with automotive type wax.

Perform scheduled engine maintenance. Refer to Engine

Manual for detailed instructions.

Ensure mower blade hardware is tightened to 115 - 125 Ibf-ft.

(156- 169 Nom). Check mower blades for wear. Sharpen or

replace mower blades as needed (see Sharpen the Mower

Blades on page 18).

Every 50 Lubricate Front Axle and Pivot Points Oil all pivot points, pin connections, and apply grease to front

Hours axle grease zerk (see LUBRICATE UNITon page 20).

Clean Battery

Check Fasteners

Check All Belts

Every

100

Hours

Every

400

Hours

Keep battery and battery terminals clean (see Clean Battery on

page 19).

Every

500

Hours

Grease Front Axle Castor Pivots

Change Hydraulic Oil and Filter

Check mower blade mounting hardware and all other fasteners.

Replace missing or damaged fasteners. Tighten all nuts and

bolts to their correct torque value.

Replace worn or deteriorated belts.

• Check mower drive belt. See Replacing Mower Belts on

page 22 for belt location.

• Check PTO belt. See Replacing Mower Belts on page 22

for belt location.

Check transmission belt. See Replacing the Hydro Pump

Belt on page 23 for belt location.

Repack front axle castor pivots (see LUBRICATE UNIT on

page 20).

See Change Hydraulic Fluid and Filter on page 17.

GB- 16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Ariens Promaster 144Z Spezifikationen Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rasenmäher Ariens Promaster 144Z