Ariens 920402 - Sno-Tek 24E Betreibershandbuch PDF herunterladen (Seite 10)

EN – 9

BOTTOM COVER REMOVAL

NOTICE: Save all hardware for reinstallation.

1. Stop engine, remove key and wait for all moving parts

to stop and for hot parts to cool.

2. Disconnect spark plug wire from engine.

3. Place unit in service position. See Service Position on

page 8.

See Figure 3.

4. Remove lock pins from axle ends and remove wheels.

NOTICE: Grease axle before reinstalling wheels.

See Figure 4.

5. Remove hardware retaining bottom cover to frame

and remove cover.

WARNING: AVOID INJURY. Before placing unit

in service position, close fuel valve and drain fuel

from tank and fuel system. See Draining Fuel

System on page 8. Make sure unit is secure and

will not tip.

Figure 3

1. Axle Lock Pin

2. Wheel

Figure 4

1. Bottom Cover

2. Hex Bolt

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Keine Kommentare

Ariens 920402 - Sno-Tek 24E Betreibershandbuch Seite 10