Ariens Platinum 30 Spezifikationen PDF herunterladen (Seite 12)

EN - 12

4. Remove the gear cover from top of

chute pedestal.

5. Release the lock arm on the gear

assembly with your finger and rotate the

discharge chute so it points straight

ahead.

NOTICE: Make sure alignment markers on

gear assembly are lined up when discharge

chute is pointing straight ahead.

6. Remove rubber grommet from control

panel.

7. Make sure the chute control cable is

routed between the lower handlebar and

the bottom of the control panel, insert

control assembly into slot in control

panel from below and install assembly

into nylon bushing in control panel. See

Figure 13.

8. Reinstall rubber grommet over control

assembly knob and into control panel.

1

5

3

2

OS7040

4

Figure 12

1. Mounting Holes

2. Discharge Chute

3. Chute Pedestal

4. Discharge Chute Ring

5. Mounting Hardware

Figure 13

1. Control Assembly

2. Nylon Bushing

3. Push Nut

4. Socket Extension (Optional)

5. Socket, 3/4"

1

1

2

3

2

3

4

5

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Kommentare zu diesen Handbüchern

Keine Kommentare